The Wiring Rules apply to electrical installations in all types of premises and land used by electricity consumers, not just domestic installations. AS/NZS 3000 is called up in the legislation of all Australian states and territories and is therefore mandatory.
AS/NZS 3000 is divided into two parts:
Part 1: Scope, application and fundamental principles
Part 2: Installation practices (this section provides a deemed to comply solution)
Over six hours the course examines Part 1 and Part 2 of the latest revision, in detail and how the legislation mandates the use of Australian Standards. (The WH&S Legislation mandates that all designs must be safe for the whole of life of a product).
The course concentrates on the concepts embodied in the Wiring Rules and how these are to be applied in practice. Included in the course are several exercises designed to demonstrate electrical safety principles.
Upon completion, participants should have gained an understanding of the core electrical safety concepts contained in the Wiring Rules and associated standards. They should also be able to use a range of implementation methods to ensure electrical safety.
Please use this form to contact us
or call +61 3 9321 1700
We can bring this course direct to you and your organisation. For groups of six or more we provide cost-effective, customised and outcome-focused in-house training.
Find out more about how we can help you and your team by completing an enquiry form or calling us on +61 3 9321 1700.
This course is designed for the designers of electrical installations.
John Giles is a highly experienced electrical engineer with a detailed understanding of all aspects of electrical engineering. He has a broad understanding of civil, structural and mechanical engineering principles and practices gained from experience in the infrastructure project industry. His experience spans more than 40 years.
John’s varied experience includes hydro-electric, diesel and gas turbine power generation, HV power transmission systems, HV power distribution, water and wastewater treatment, water distribution, control and instrumentation, railway power distribution, microwave and communications networks, building services, and process automation.
John was chief engineer for UGL Infrastructure for 30 years where he lead and maintained the high standard of engineering service produced for the company’s infrastructure projects.
John led the development of 'Safety In Design' approaches within UGL Infrastructure, introducing tools such as the CHAIR process and HAZOP/CHAZOP reviews. He has conducted over 100 SID workshops for electricity and water/wastewater infrastructure projects.
He is Principal of his own company, Appleseed Engineering, a member of CIGRE Australian Panel AP B2, and member of Standards Australia Committees EL43 (AS2067) and EL52 (AS7000), and a Fellow of the Institution of Engineers Australia.
For AS/NZS 3000 the following items will be covered in detail:
The examination of AS/NZS 3000 will include discussion of the methods specified in Part 2 to achieve the safety requirements of Part 1.
The workshop will cover the following areas:
The course also looks at AS/NZS 3001 that details the specific requirements for transportable structures and vehicles. This standard includes additional requirements to those detailed in AS/NZS 3000 and covers supply arrangements for transportable structures, electrical installations in transportable structures, electrical installations in tents and non-rigid annexes, and connection to the site supply.